ACCP Level III Examinations

Multipart Examination

Successful ACCP Professional Level III certification candidates must complete the following four examinations:

Basic Examination

The multiple choice ACCP Professional Level III NDT Basic exam from the ASNT Level III program covers basics of ten NDT methods, SNT-TC-1A, ANSI/ASNT CP-189, plus materials, fabrication, and production technology.

Method Examination

These are the same method exams as in the ASNT Level III certification program and are written from the topical outlines listed in SNT-TC-1A.

Procedure Preparation Examination

In the procedure preparation exam, candidates prepare an NDT procedure to meet the requirements of a supplied code.

Practical Examination

ACCP Professional Level III candidates must successfully complete a combination practical which covers all techniques within the method.

Level III Reference Materials for Exam Preparation

The table below lists each examination now available under the ACCP Professional Level III certification program. For certification in any method, candidates must successfully complete each of the three written examinations and the practical examination. Clicking on the exam will bring you to the topical outline and reference page for that exam.

Exam	No. of Items*	Time	Certification
Basic Basic Administration of NDT personnel certification programs SNT-TC-1A, 2016 edition ASNT CP-189, 2016 edition General familiarity with other NDT methods Radiography (safety, X-ray, and isotope methods) Neutron radiography Ultrasonic testing Eddy current and flux leakage testing Liquid penetrant testing Magnetic particle testing Leak testing Acoustic emission testing Visual testing Thermal/infrared Materials, fabrication, and production technology Properties of materials, origin of discontinuities, and failure modes Materials processing (casting, welding, forging, brazing, soldering, machining, heat treatment, surface treatment, adhesive bonding, etc.) Dimensional metrology	135	4 hrs	Required for ASNT NDT Level III & ACCP Level III Certification
Magnetic Particle Testing (MT) Magnetic Particle Testing Principles/Theory Principles of magnets and magnetic fields Characteristics of magnetic fields Equipment/Materials Magnetic particle test equipment Inspection materials Technique/Calibrations Magnetization by means if electric current Selecting the proper method of magnetization Demagnetization Interpretation/Evaluation Procedures Safety and Health	90	2 hrs	NDT and ACCP
Liquid Penetrant Testing (PT) Liquid Penetrant Testing Principles/Theory Principles of liquid penetrant process Theory Proper selection of PT as method of choice Liquid penetrant processing Equipment/Materials Liquid penetrant test units Methods of measurement Lighting for liquid penetrant testing Materials for liquid penetrant testing Testing and maintenance of materials Interpretation/Evaluation General Factor affecting indications Indications from discontinuities Relevant and Nonrelevant indications Procedures Liquid penetrant testing procedures, codes, standards and specifications Safety and Health Toxicity Flammability Electrical hazards Personnel protective equipment Right to know (MSDS) Disposal of used materials	90	2 hrs	NDT and ACCP
Radiographic Testing (RT) Radiographic Testing Principles and Theory Equipment/Materials Electrically generated sources Particulate radiation sources Radiation detectors Techniques/Calibration Imaging considerations Film processing Viewing of radiographs Judging radiographic quality Exposure calculations Radiographic techniques Interpretation and Evaluation Procedures Safety and Health Exposure hazards Methods of controlling radiation exposure Operational and emergency procedures Dosimetry and Film Badges	135	4 hrs	NDT and ACCP
Ultrasonic Testing (UT) Ultrasonic Testing Principles/Theory Equipment/Materials Techniques/Calibrations Contact Immersion Comparison of contact and immersion methods Remote monitoring Calibration (electronic and functional) Interpretation/Evaluations Evaluation of base metal product forms Evaluation of weldments Evaluation of bonded structures Variables affecting test results Evaluation (general) Procedures Specific applications Codes/Standards/Specifications Safety and Health	135	4 hrs	NDT and ACCP
Visual Testing (VT) Visual Testing Fundamentals Vision and light Ambient conditions Test object characteristics Equipment Accessories Magnifiers/microscopes Mirrors Dimensional Borescopes Video systems Machine vision Replication Temperature indicating devices and materials Chemical aids Surface comparators Lasers Applications and Requirements Raw materials Primary process materials Joining processes Fabricated components In-service materials Coatings Other applications Requirements Variables Affecting Results of interpretation/ Evaluations Equipment including type and intensity of light Material including the variations of surface finish Discontinuity Determination of dimensions (ie: depth, width, length, etc.) Sampling/scanning Process for reporting visual discontinuities Personnel (human factors) Documentation Safety	90	2 hrs	NDT and ACCP